5 Tips for Installing CCTV Cameras

Security is something that each and every business owner needs to be concerned about. It doesn’t matter if you run a small convenience store or a large warehouse, there’s always the chance that someone could break into your property and do some damage or steal something. Hence, nowadays, surveillance cameras have become quite the necessity.

In this article, we will look at what factors to consider while installing CCTV cameras on your business premises. We will also outline some best practices so that you can get the most out of these cameras.

Think about What Kind Of Camera You’ll Need

Depending on the type of business, your CCTV needs will vary. Think about just how much of a target your business is for burglars. For instance, pawn shops are very attractive marks for thieves, just like an electronic store would be as well.  In that case, you’ll need to invest in some of the highest quality cameras and get enough to visually cover the entire premises.

If your business is the type that doesn’t carry much goods or cash, then consider yourself less of a target. In that case, you may not need the most high-end camera nor too many of them. In fact, some very small businesses might be able to get away with a mixture of real and dummy cameras.

Position the Cameras Correctly

Once you’ve purchased the right cameras, it’s time to mount them in the correct locations. Typically, most of your surveillance cameras should be mounted much higher than eye level. This allows you to achieve a greater field of vision. If you want to install a couple specifically for identification, these should be installed closer to eye level.

Check for Blind Spots

With the cameras installed, check for blind spots by having someone walk around the premises while you monitor the feed. If you aren’t able to see than person at any point, then you’ve detected one.

Pay Attention to the Cabling

If your cabling is exposed, then the entire surveillance system is vulnerable. Those wishing to break into your premises can simply snip the cables and sever the cameras from the feed. Hence, it’s best to leave them out of reach.

Such a task is best left to a company that has a lot of experience working with CCTV and other electrical engineering systems. They identify all the weak spots for CCTV camera cabling and help you conceal them better.

Getting the Best Quality Feed

It’s not enough to record the crime being committed; you should also be able to help the authorities identify the criminal. Therefore, you need to make sure that you achieve the highest quality image.

First of all the DVR must be completely compatible with the camera’s resolution. For instance if you get CCTV cameras with D1 image quality, you shouldn’t buy a DVR that’s only capable of CIF.

Secondly, you must make sure to keep camera lenses clean all the time. This is particularly important for those that are located outside as they may be subjected to dust and other forms of debris.

Last but not least, make sure that there aren’t any unnecessary obstacles (such as overgrown foliage) blocking the camera’s line of sight.

And there you have it – 5 tips for installing CCTV cameras!


Leave a Comment

Your email address will not be published. Required fields are marked *

*